CabinetCP 4
Dry suction blasting
Compact Dry Suction Blast Cabinet
Model CP 2
Compact dry-suction cabinet for smaller parts and operator-led cleaning or finishing.
- ✓ Engineered in Malaysia
- ✓ Application-specific configuration
01CabinetMachine family
02Dry suction blastingBlasting process
035 key featuresSource specification retained
04Local engineeringBuild, commissioning and support
Platform overview
Built around practical production needs.
Final machine configuration depends on component geometry, target finish, cycle time, abrasive, loading method and available utilities.
- 01✓Compact, space-saving cabinet
- 02✓Built-in dust collector
- 03✓Abrasive drop-back system
- 04✓Side access door
- 05✓Blast nozzle and air wash gun
Typical applications
Where this platform fits.
Use these applications as a starting point. SIN-BLAST confirms media, pressure, handling and dust-control requirements against the actual component.
Discuss your component →- 01
Surface cleaning, derusting and descaling
- 02
Paint removal and decarbonizing
- 03
Surface preparation for coating, bonding and painting
Source technical data
Machine specification.
Values below come from the existing SIN-BLAST product page. Confirm final dimensions, utilities and options before order.
- Blast chamber
- 710 mm (W) x 600 mm (D) x 800 mm (H)
- Load capacity
- 25 kg maximum
- Electrical supply
- 230V AC, single phase, 50 Hz
- Compressed air
- 25 CFM at 100 PSI
- Suction motor
- 230V AC, single phase, 50 Hz
- Dust collector
- 4 polyester filter bags
- Lighting
- 20 W fluorescent lamp
Compatible blast media
Aluminium oxideGlass beadsPlastic media
Cabinet
CabinetCP 3-1
Dry Suction Blast Cabinet
View machine ↗
Blast roomCBR-40
Standard Container Blast Room System
View machine ↗Configure the right system
Bring us the part and production target.
SIN-BLAST will confirm whether CP 2 fits as shown or needs application-specific handling, recovery or controls.